Welcome to Flextraction, the UK's largest independent manufacturer and supplier of spot extractors for dust and fume extraction

Tiltable Pre-Separator from Flextraction

Posted July 22nd, 2008

A Kiekens 2,000kg capacity tilt able pre-separator is available from Flextraction Ltd, the Melton Mowbray, specialist solution provider capturing at source all forms of airborne contamination – dust, fume and oil mist and sole UK representatives for Kiekens Products BV, Holland, industrial high vacuum cleaning systems.

This reinforced pre-separator has been designed for use with cyclone operations for high vacuum dust extraction installations, industrial vacuum cleaners and Kiekens plate filter type ‘Dustmaster’ fine dust systems. It has a manual operated tipping mechanism for unloading and is fitted with forklift truck profiles. It is supplied with either a 60mm, 80mm or 100mm diameter 325mm high cyclone pre-separator cover and safety chain to keep the unit from moving, the cover has a hinged partition for easy access and it is supplied with either wheel and swivel casters with brakes.

Options available include a sieve, drain cock and a water and wear resistant PV hose.

Other Kiekens pre-separators are available from Flextraction for high vacuum and low vacuum applications.

TEKA’s New Plasma/Oxyacetylene Modular Cutting Tables with integrated Fume Extraction

Posted July 22nd, 2008

A new plasma cutting table with integrated fume extraction from German fume extraction equipment manufacturers TEKA has been launched by Flextraction Ltd, the Melton Mowbray, suppliers and manufacturers of Local Exhaust Ventilation (LEV) products for industrial dust and fume extraction and their sole UK representative.

TEKA’s new plasma tables are supplied as modular assemblies so that additional lengths can be retrofitted to existing cutting tables at a later date. They have sectional suction chambers every 500mm and are suitable for both portal and boom cutting machines. For larger air movements, such as found in shipyards and other heavy duty fabrication shops, they are usually supplied with either TEKA’s new integrated ZPF 9N or 9H central suction and de-dusting cartridge filter system which takes polluted air from the suction point using specially designed pipework into the filtering units. (On the stand a 2m x 1m plasma table with a FILTERCUBE 9 central suction and filter unit will demonstrate how the system operates) The ZPF 9 is equipped with 9 long life BGIA M standard filter cartridges with a dust collecting efficiency of >99% . Included in the filtering units is a de-dusting system.

A feature of this system is the micro-processor controlled PULSE-CONTROL, which programmes and controls the operation of the suction and filtering devices. With easy to read digital display, it calculates and automatically adjusts the specific compressed air requirements of the de-dusting operation. A GSM capable version of the programme is also available providing a remote control facility.

Other features of the ZPF 9 central suction and filter units are their modular design to suit customers’ requirements, use of standard filter cartridges, dust collected efficiency > 99%, de-dusting of the filter cartridges using the POWER-SPRAY system, re-circulation of cleaned air into the work area.

For smaller air movements the FILTERCUBE ZPF 3 and ZPF 4 are available with fully automatic de-dusting and BGIA M filter cartridges.

The ZPF 3 is supplied with 3 suction arms and the ZPF 4 with 4 suction arms. These arms are 150mm in diameter, 3m in length and are supplied with exhaust ventilation hoods with throttle valve.

New Wet Dust Separator from Flextraction

Posted July 22nd, 2008

A new TEKA type HNW1500 high performance Wet Dust Separator has been launched by Flextraction Ltd, the Melton Mowbray, suppliers and manufacturers of Local Exhaust Ventilation (LEV) products for industrial dist and fume extraction and sole UK representatives for TEKA GmbH, Germany, localised extraction arms portable and fixed filter systems manufacturer.

The HNW1500 Wet Dust Separator is one of a series with airflows ranging from 1,500m3/hr to 10,000m3/hr. The engine sizes range from 1,5kW 400V 50Hz up to 15,0kW 400V 50Hz. With its high dust collection capacity it is designed for a wide range of industrial applications.

The air is cleaned by swirling the dust with water, with the air being centrifuged in the W-swirl, which was originally designed for the separation of explosive dusts and adopted for use with this Wet Dust Separator. Dust particles in the air flow are enclosed in the water due to the strong turbulence in the swirl.

Water in this separator can be used again and again and pumps or nozzles are not used. A robust high performance is utilised providing continuous operation of the separator. Through the arrangement of the impeller, the fan achieves a high negative pressure.