|call||+44 (0)1664 410 641|
|fax||+44 (0)1664 480 244|
Archive for January 2009
Posted January 29, 2009
flextraction Ltd, supplier and manufacturer of Local Exhaust Ventilation (LEV) products for dust and fume extraction in the work-place is exhibiting a number of new and existing products on stand number L36 at Southern Manufacturing 09 (11th – 12th February 2009) in Farnborough, Hampshire and stand number 092 at Health & Safety 09 (24th – 25th February 2009) in Sandown Park, Surrey.
Products from TEKA GmbH, Germany, localised extraction arms manufacturer, Fumex AB, Sweden, localised extraction arms and filters, Delfin of Italy, industrial high vacuum cleaning systems, as well as PISAC International’s range of their axial, centrifugal, roof and centrifugal smoke exhaust fans will be shown.
Products on show will include:
TEKA's 'Caremaster SF’ a BIA European Standard approved mobile one way welding fume filter for industrial fume extraction with a fan capacity of 2,500m3/hour and a dust collection efficiency of around 99.9% using a class W3 filter
Fumex's compact and lightweight LF70 mobile filter is designed for extraction of gases, fumes and dust in laboratories, hospitals, pharmaceutical manufacturing, electronic component manufacturing, and laser branding as well as welding. With a highly efficient 0-70 l/second airflow, low noise level up to 56dB(A), it can be used with a wide range of easy to change gas and particle filters.
Fumex's LFK 175 single station local fume extractor designed to remove, fumes, gases and dust from the work station using a Terfu 75mm diameter arm with a maximum airflow of 0-80 l/second will be shown. Using a H13 filter, it is 99.99% efficient for 0.3µm particles.
Details of flextraction's own brand products will be available, as well as information on Industrial Cleaning Equipment, including Delfin's vacuum cleaner for the suction of slightly contaminated liquids, swarfs and accompanying coolants, lubricants and wet industrial waste.
Also available will be details on a new range of industrial Procool Spot Coolers from Ecotechnics S.p.A. based in Italy providing cool air where you need it in the workshop.
Posted January 26, 2009
TEKA’s AIRTECH series of new central air flow systems is now available from flextraction Ltd, the Melton Mowbray based supplier and manufacturer of Local Exhaust Ventilation (LEV) products for industrial dust and fume extraction and sole UK representative for TEKA GmbH, Germany, manufacturer of localised extraction arms and portable and fixed filter systems.
The 3-phase 400V/50Hz AIRTECH series is designed as a stand alone central cartridge filter system to clean polluted air and re-circulate clean air back into large working areas such as manufacturing and fabrication plants as well as warehousing facilities. There are 3 models in the series: AIRTECH P10 with 10,000m3/hr air flow capacity and 378m2 filter surface, AIRTECH P24 with a 24,000m3/hr capacity and 504m2 filter surface and AIRTECH P30 with a 30,000m3/hr capacity and 672m2 filter surface.
All 3 systems have a fan in a sound absorbing chamber, fully automatic dedusting, extensive dust containers, require minimum maintenance and are equipped with category BGIA M (Berufsgenossenschaftliches Institut für Arbeitsschutz) long life filter cartridges providing a >99% dust collecting efficiency. 300mm diameter air intakes are found at a height of approx. 2m. on two sides of each unit, with flaps that automatically close during dedusting, whilst 14 air nozzles recirculate with warm or cool air depending on the season, from 3 directions at the top of each unit providing up to air flow up to 16m. The dedusting system has a variably adjusted either manually or by differential pressure or time dependent, micro processor controlled PULSE-CONTROL, to monitor all the suction and filtering device processes.