For sales, advice and support, contact Flextraction's team today!

New TEKA Central Air Flow System from flextraction Ltd

TEKA’s AIRTECH series of new central air flow systems is now available from flextraction Ltd, the Melton Mowbray based supplier and manufacturer of Local Exhaust Ventilation (LEV) products for industrial dust and fume extraction and sole UK representative for TEKA GmbH, Germany, manufacturer of localised extraction arms and portable and fixed filter systems.

The 3-phase 400V/50Hz AIRTECH series is designed as a stand alone central cartridge filter system to clean polluted air and re-circulate clean air back into large working areas such as manufacturing and fabrication plants as well as warehousing facilities. There are 3 models in the series: AIRTECH P10 with 10,000m3/hr air flow capacity and 378m2 filter surface, AIRTECH P24 with a 24,000m3/hr capacity and 504m2 filter surface and AIRTECH P30 with a 30,000m3/hr capacity and 672m2 filter surface.

All 3 systems have a fan in a sound absorbing chamber, fully automatic dedusting, extensive dust containers, require minimum maintenance and are equipped with category BGIA M (Berufsgenossenschaftliches Institut für Arbeitsschutz) long life filter cartridges providing a >99% dust collecting efficiency. 300mm diameter air intakes are found at a height of approx. 2m. on two sides of each unit, with flaps that automatically close during dedusting, whilst 14 air nozzles recirculate with warm or cool air depending on the season, from 3 directions at the top of each unit providing up to air flow up to 16m. The dedusting system has a variably adjusted either manually or by differential pressure or time dependent, micro processor controlled PULSE-CONTROL, to monitor all the suction and filtering device processes.

For sales, advice and support, contact Flextraction's team today!

Be first to hear of our special offers!

Return to page top